Television front frame and back cover mould
|Terms of Trade:||FOB,CFR,CIF,FCA,CPT|
|Min. Order:||1set Set/Sets|
|Delivery Time:||80 Days|
|Place of Origin:||China|
Model No.: CT-10881
The housing of the television has a front frame and a back cover, The quality of the outer surface is required no flash, marks of ejection and any scratching. At the same time, this is main structure of television and display devices, it requests strong not weak on the Television Housing Injection Mould, welding line posotion must be considered during mould design.
Considering Television and Display Housing and Back Cover is not transparent, Usually, the greater the crystallinity, the greater the density of plastics and the greater the rigidity, and corrosion resistance must be considered, ABS plastic resin is the first option for molding material. Ceeo company has a group of engineering members who are professional to analyse product structure and mould design, they are skilled with good knowledge of molding. It's very important to design the moud at the beginning. For example, parting surface and parting line definition. We must consider them as follows:
- Easy to demould, keep the part in the core side of mould for better ejection and also it's better for parting line in side surface and core pulling
- Ensure that the exterior surface of Television and Display Housing Part is not damaged
- Ensure dimensional accuracy of Television and Display Housing and Back Cover part
- Better with venting on mould
- It must consider that it's easy for mould machining
Gate position design for Television Front Frame and Back Cover ( Display Housing ) Plastic Mould
In the design of this injection mould, the position and size of the gate are strict, so it may be necessary to modify the size of the gate after the initial mold test. we normally consider the following:
- The gate should be set at the maximum wall thickness of part
- It must reduce welding lines
- It's be good of mould venting
- Consider the effect of molecular orientation
Due to the relatively large volume of the plastic parts, the relatively high temperature of the part of the die kernel, and the lower temperature caused by the external contact with air, the temperature is prone to produce uneven temperature distribution, and the characteristics of the mould materials such as thermal expansion, cold expansion and contraction. So that the mold will produce varying degrees of deformation, so cooling line design is very critical.
- Try to keep the plastic parts shrink evenly and maintain the heat balance of the mould
- The more plastic the cooling water hole is, the larger the aperture is, and the more uniform the cooling effect is to the plastic parts
- As far as possible the distance from the cooling water hole to the surface of the cavity is equal
- Enhanced cooling at gate
- Reducing the temperature difference between water line in and out
- Properly choose water line plug position
- To avoid inteference with the other structure of mould
Television/Computer/Display Front Frame and Back Cover Shell Housing Injection Mould Technical Specification
- Mould cavity: single cavity
- Injection material: ABS
- Moldbase: LKM
- Mould cavity and core steel: 718H, 1.2738
- Tolerance: +/- 0.02mm
- Finishing: Polishing
- Gating: side gate
- Moldlife: 500000 shots
- Hot runner system: Yudo, Synventive, HRS, Moldmaster
- Mould packing: wooden box
- Leadtime: 80 days
If you have any technical questions about Television/Computer/Display front frame and back cover products and moulds, please don't hesitate to contact us at any time, we shall be very glad to give you response in 24 hours, warmly welcome you to visit our factory, and we do wish you to receive your RFQ in a quick time, looking forward to hearing from you, thank you very much.
Zhejiang Ceeto Molding Technology Co.,Ltd.
Zhejiang Ceeto Molding Technology Co.,Ltd., registed in year 2018, which has a strong group members mould and processing experts which have rich experience in design and manufacturing plastic injection moulds, die casting moulds. Ceeto Molding provides customer with high quality injection moulds and products , die casting products mainly in Automotive field, Home appliance field, Daily commodity field etc.with reasonable price. Building area is 11000 square meters. Currently, we have employee 180 and a group of Program Engineers are in charge of projects according to customers from different global regions, 30 technical engineerings who are having much experience in designing and developing Mold 2D assembly drawings & Mold 3D designs.
Our yearly output molds are about 400 sets not including production parts projects.
In Recent years, Ceeto Company has been introducing not only advanced manufacturing equipments, but also a large number of talents, As a result, the manufacturing level has reached to the international advanced level, and we have also gained the majority of customers' trust and respect.
Ceeto Company sincerely hopes that with the principle of "To be honest men and to do things sincerely ", we could fully expert our advantages and rich manufacturing experience to provide the customers with higher-level and higher-quality products and better service.
- Company Name: Zhejiang Ceeto Molding Technology Co.,Ltd.
- Representative: WANG JUAN
- Product/Service: Plastic Injection Molds for Automotive , Plastic Injection Molds for Washing machines , Plastic Molds for air condition , Medical Plastic Injection Mould , Die Casting Moulds and Products , Plastic Molds for Daily commodities
- Capital (Million US $): 10,000,000RMB
- Year Established: 2018
- Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
- Export Percentage: 71% - 80%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 2
- No. of R&D Staff: 11 -20 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: No.78 Baiyunshan Road, Ningbo,China
- Contact Person: Ms. Jenny Wang
- Tel: 86-574-86863623
Premium Related Products